Sea Girt Wreck

Shipwreck Sea Girt Wreck
Type:
shipwreck, schooner barge
Depth:
80-85 ft
Sunk:
early 1900s ?
compass

The "Sea Girt Wreck" is named for its location off the town of Sea Girt. Unless there were casualties, the sinking of an old schooner barge like this often went completely unrecorded, so it is unlikely that this wreck's real name or circumstances will ever be known.

The wreckage consists of two parallel wooden walls 3-4 ft tall, corresponding to the hull sides, with a third much lower wall down the center - the ship's keel. At the east end, the bow is broken down, but an impressive assortment of machinery remains, including a large old-style "Popeye" anchor and chain pile, and a huge winch to raise and lower it. Slightly to the north is a small boiler, although the associated "donkey" engine is missing, probably salvaged shortly after the sinking. At the west end of the wreck, the three walls simply come together, and the wreck peters out.

The "Sea Girt" is quite large for a wooden wreck, perhaps 250 ft or more, approaching the practical limits for wooden ship construction. All of these clues suggest a rather later sinking date for this wreck, probably after the turn of the century. Lobsters can be found in deep holes along the outer walls and in the chain pile. Sea Bass are common, but not so for Blackfish. Also not a great wreck for mussels, but scallops may be found around the bow area. The bottom is clean sand and pea gravel.

Shipwreck Sea Girt Wreck
Two views of the anchor
Shipwreck Sea Girt Wreck
Inspection reveals the hawse pipe lying next to the shank.
Shipwreck Sea Girt Wreck
Anchor chain, with the drum of the winch in the background.
Shipwreck Sea Girt Wreck
Shipwreck Sea Girt Wreck
Shipwreck Sea Girt Wreck
The anchor winch - probably 10 feet long
Sea Raven
A favorite photo subject - A Sea Raven, in red phase.
deck Light
This glass deck-light, or dead-light, was recovered from the "Sea Girt Wreck" in 2000, the second of such known.

Comments on Sea Girt Wreck

Questions or Inquiries?

Just want to say Hello? Sign the .

Submit a Comment

Your email address will not be published. Required fields are marked *


Click image to replace if unable to read.

Enter the digits from the image above, except for the last one:

This site uses Akismet to reduce spam. Learn how your comment data is processed.


fish anatomy

Fins come in a bewildering assortment of designs. Options include long, short, vented, solid, soft, hard, open-heel, full-foot, and a wide range of specious do-dads, most of which solve problems that I cannot confirm even exist. One manufacturer has even come out with fins that are left and right, something that I think must be truly bothersome while gearing up.

The fact is, most fin designs simply miss the mark for New Jersey divers. What is needed here is a solid, tough fin with a generous foot pocket that will hold not just your foot, but also whatever bulky thing your foot is in. This will be at least a 6mm booty, if not a drysuit boot with perhaps several pairs of socks underneath. Simple solid buckles with quick releases are essential. You will be amazed at how strongly your fins may stick onto your feet at the end of a dive. Small vents in the toe of the foot pocket help here, to break the vacuum.