USS Tarantula SP-124

Shipwreck USS Tarantula
Type:
shipwreck, patrol boat, converted yacht, U.S. Navy
Built:
1912, Neponset MA USA
Specs:
( 129 x 19 ft ) 160 gross tons
Sunk:
Monday October 28, 1918
collision with steamer Frisia - no casualties
Depth:
115 ft

Tarantula

CDROM

Commonly known as the Gun Boat, the identity of this wreck had been unknown since she was originally located by Jay Porter. She was given the name Gun Boat by divers who noticed the armament that she had carried. In 1985, Billy "Bubbles" deMarigny, a local diver, found and recovered the ship's bronze bell. Inscribed on the bell was the ship's true name, Tarantula. The Tarantula was a private steam yacht. But why would a yacht be armored?. Through some research, I believe I've found the answer.

While researching the name Tarantula, I came across two ships. Both were yachts owned by W.K. Vanderbilt, one built in 1902 and the other in 1912. I thought I had found the answer when I read that the ship built in 1902 had been commissioned by the Canadian Navy during WW I. This ship was renamed the H.M.C.S. Tuna and would have certainly explained the wreck's guns, but unfortunately, my early assumption was wrong. The Tuna had never sunk; she was sold in 1918 and eventually stripped for salvage. The Gun Boat wreck off of Long Island was the 128 foot by 19 foot, 159-ton U.S.S. Tarantula, built by George Lawley and Son Corp in 1912. She was in service with the U.S. Navy at the time of her loss. After a collision with the Royal Holland Lloyd Line freighter SS Frisia, on October 28, 1918, the Tarantula sunk.

Today, the U.S.S. Tarantula lies 22 miles off Jones Inlet in 115 feet of water. If you want to dive on her or fish over this wreck, most captains know her as the "Good Gun Boat" wreck. The remains are very low lying with only her boilers coming off the bottom about seven feet. She lies in a straight line. Her bow, which only protrudes about three feet off the bottom, still has a navy anchor in place on the starboard side. Divers can dig just ahead of the boilers for ammunition or behind the boilers for china and silverware.

Excerpted from Wreck Valley CDROM by Dan Berg

Shipwreck USS Tarantula
Frisia
1913 postcard of SS Frisia


Comments on USS Tarantula

Questions or Inquiries?

Just want to say Hello? Sign the .

Submit a Comment

Your email address will not be published. Required fields are marked *


Click image to replace if unable to read.

Enter the digits from the image above, except for the last one:

This site uses Akismet to reduce spam. Learn how your comment data is processed.


lanyard

Chances are your light or other piece of gear came with a wrist lanyard. This item is probably ok for diving in the tropics where you shouldn't be doing anything with your hands anyway, but around here it is lousy. Wrist lanyards are a pain to put on and a pain to get off, and in the case of a light, if you let go of it to do something with both hands, it will invariably get in the way and bob around until it shines in your eyes and blinds you. When you finally get fed up with it, you will take it off, and in a careless moment, your equipment will be lost. Here is a much better rig, commonly known as a "hi-lo" lanyard:

Take the wrist lanyard off, and throw it away. Get two brass snaps and a piece of rope. Braided 1/2 " nylon is what I used because it is supple, won't rot, won't unravel, and doesn't float. Attach a brass snap to each end. You can just tie them on, or get fancy like me and make streamlined loops. The end-to-end length of mine is about four feet, including the snaps, but you can experiment. Attach the base ring of one of the brass snaps directly to your gear where the lanyard was.

Printed from njscuba.net