Dive Planning (2/2)

Why are tables not taught in OW classes anymore?

tursiops
Marine Scientist and Master Instructor (retired)
Feb 14, 2023

Many new divers have been trained only to use dive computers; they have had no introduction to or any familiarity with dive tables. Many posts on ScubaBoard respond to posts about "what do I do if my computer fails" with the statement, "just use tables." This is a disconnect ...

Here is the deal on tables, why they have pretty much disappeared from recreational diving, and why the idea of tables (and sometimes their use) is still valid.

Both dive tables and dive computers try and estimate the amount of nitrogen you have absorbed into your body as a result of the amount of time you have spent at depth (i.e., under pressure). It is the (greater than atmospheric) ambient pressure at depth that pushes the nitrogen into your tissues and blood, and with more time spent at that depth, more nitrogen gets pushed in.

The models that try and track this "on-gassed" nitrogen are mathematically messy. Most of them assume that your body is composed of a number of different tissue types, co-called "compartments," some of which absorb the nitrogen more quickly, others more slowly; and, each of these compartments has a maximum amount of nitrogen it can absorb. There is a lot to keep track of. While you are underwater at some depth breathing compressed gas, your body is absorbing all this nitrogen, and then when you ascend the nitrogen begins to "off-gas," which it can only do at the same rate at which it on-gassed, which of course is a different rate for each of the assumed compartments!

When the dive tables were first developed, there were no electronic computers like we have today. Everything was done by hand using mechanical calculators and pencil and paper. Consequently, the table-makers wanted to keep it as simple as possible, so the tables were for "square profile" dives, meaning you descended to a depth, stayed at that depth for the duration of the dive, and ascended. That was OK at the time, because there were no real recreational divers swimming up and down and around coral heads looking at pretty fish and investigating wrecks, and working dives (Navy and commercial) tended to actually be square profiles; everything was fine with tables.

The down-side for square profiles was that the amount of gas used was based on being at the maximum depth for the entire dive, until you ascended, so it was common to run out of gas before hitting your No Decompression Limits. This was also fine, because there was less worry about the "accuracy" of the NDL calculations.

Those early dive tables (for example, the US Navy dive tables) had another assumption built-in that was rather restrictive for recreational divers; the slowest compartment (the one that "controlled" your on-gassing buildup of nitrogen, and your off-gassing rate) was deemed to have a time-constant of 120 minutes. This meant that the surface interval between dives when you were doing a multi-dive day had to be rather long ... or you were not doing much off-gassing.

Diving Science And Technology (DSAT), a corporate affiliate of PADI - starting in the mid-1980s - rethought recreational dive tables based on using a 60-minute compartment (instead of 120 minutes) as the controlling compartment; using other modern technologies (like Doppler bubble sensing and electronic computers) they developed the Recreational Dive Planner (RDP), which allowed for shorter surface intervals and more granularity in the on- and off-gassing calculations. That model – originally available only in standard dive tables – also became embedded in an electronic hand-calculator version of the table, in an analog circular slide-rule version (The Wheel), and finally in several dive computers, where it is known as the DSAT algorithm.

The big advantages of DSAT and the RDP model over previous models were that (1) it was specifically for non-deco diving, so did not need to have embedded in it any additional conservatism for decompression diving, and (2) since the controlling compartment was only 60 mins, surface intervals could be shorter and thus single-day repetitive diving was made more realistic and easier.

The huge advantage of having the gas on-gassing and off-gassing tracked by a computer that you work on your wrist (or had in a console) was that you could track your actual dive, with its ups and downs, and not be forced into a square-profile assumption. As a consequence, instead of going to (say) 80 feet and spending your entire dive there, you could stay a few minutes at 80, come up to 60 for a while, then 40 for a while, back down to 60, then up to 20 for a while ... and your dive computer was with you and tracking (with its model) your on-gassing and off-gassing. Nice.

There are many dive computers using a number of different models, but they all work roughly the same and all track your movements up and down in the water. Consequently, with a dive computer you get longer dives than you can by assuming a square profile on a table, and you get shorter surface intervals before the next dive. Win-Win.

Today, dive tables are rarely taught in OW classes because they are tedious to use, and give considerably less information than your dive computer. However, many argue that dive tables help you to understand the on-gassing/off-gassing better, because they don't bury everything into a small electronic device with just a (sometimes) complicated display on the front. True or not, they have pretty much gone away for recreational diving. Few know how to use dive tables, and they can easily be used incorrectly.

BUT, what happens if you are on a dive trip and your nice dive computer fails, perhaps during a dive? Best Practice, you immediately end the dive and surface, because you now do not know your depth nor how long you've been there, so you ascend and end the dive. Worse, you now do not know your nitrogen status ... so if you want to do another dive you need to account for that residual nitrogen ... and if you can't do that, then you should stay out of the water for 24h to let your body "reset" to having completely off-gassed.

Is there anyway around being in the "penalty box" for a day? Yes, there are two ways, one is certain, one is problematic. Certain: carry a second dive computer with you on all dives, so it is a backup that knows your nitrogen status and can be used if your primary fails. Problematic: revert to dive tables. Attempt to work out a version of the dives so far today before your computer failed, and use the table to estimate your nitrogen status.

Here is the problem with reverting to dive tables: suppose your computer failed on dive one of the day, and you had gone down to 80 ft for a while, then up to 60 to see the super-structure of a wreck, then up to 40 to spend some time on the reef, and were just getting ready to go to your safety stop about 50 minutes into the dive ... and your computer failed. You can surface and end the dive (just don't go up too quickly), but your square-profile equivalent dive for using tables is 80 ft for 50 minutes. But, the RDP table maxes out at 30 minutes at 80 ft. The dive you just did cannot be done on tables ... the tables say you are in decompression status! THAT is the problem with trying to revert to tables,; maybe you can, but often you cannot.

And this is why tables are not taught any more in most OW classes. They do not suit the kind of diving that recreational divers do.

https://scubaboard.com/community/threads/why-are-tables-not-taught-in-ow-classes-anymore.630274/page-3


I stumbled across this article recently while looking for places where my own content has been, errr ... 'borrowed'. * At seeing the title, I thought 'Oh boy, more idiocy on ScubaBoard, but on reading it, I found it to be well-reasoned and well-written.

That said, I am still shocked that tables have been dropped from many dive curricula. However, I have seen more people struggle with dive tables than any other part of training. I myself have said elsewhere that a dive computer should be one of the first items of dive gear a new diver gets, and once you have a computer, you are never going to look at a table again (until you go "tech" - at which point tables are everything and computers are for committing suicide.) So perhaps it is better to spend the course time drilling emergency ascent procedures rather than teaching an arcane and obsolete skill that will never be used.

* I shouldn't complain too much about that, I do it enough myself!

 1 2  

Printed from njscuba.net