The Basics

The first purchases most new divers want to make are fins, a snorkel, and a mask. The mask and the fins are necessary for diving, but while snorkeling is easy in the clear, warm, shallow waters of the Caribbean, local conditions do not favor it, as the bottom is seldom visible from the surface. None of these items should be very expensive.

2016 Update

Not much has changed in the 20 years since I first wrote this guide. These were glass, silicone, and plastic back then, and they still are. Modern stuff may be sleeker than the old models that are pictured here, but really not much has changed. I still have the first mask I ever bought, and still use it. That comes from taking good care of your gear.


dive mask
Single-window mask with purge valve

Masks come in hundreds of models and designs. Options include one to six windows, purge valves, color tinting, anti-fog coatings, and whatever else the corporate marketing guys can think up.

A mask's purpose is to let you see in the water. It is surprising just how narrow your field of view in a mask actually is, although you get used to it. Generally, the closer the main windows are to your eyes, the wider your field of view, and this is good. Side windows are supposed to increase your field of view, but they also move the main windows away from your face, and at any rate, you can easily turn your head to get the same effect. A few masks also have bottom windows, which are useful for inspecting yourself or your gauges.


fish anatomy

Fins come in a bewildering assortment of designs. Options include long, short, vented, solid, soft, hard, open-heel, full-foot, and a wide range of specious do-dads, most of which solve problems that I cannot confirm even exist. One manufacturer has even come out with fins that are left and right, something that I think must be truly bothersome while gearing up.

The fact is, most fin designs simply miss the mark for New Jersey divers. What is needed here is a solid, tough fin with a generous foot pocket that will hold not just your foot, but also whatever bulky thing your foot is in. This will be at least a 6mm booty, if not a drysuit boot with perhaps several pairs of socks underneath. Simple solid buckles with quick releases are essential. You will be amazed at how strongly your fins may stick onto your feet at the end of a dive. Small vents in the toe of the foot pocket help here, to break the vacuum.


no snorkel

Here is an item that is useful in the tropics, but much less so around here. This is because the water here is not nearly as crystal clear as in the tropics, and the depths are often greater. Therefore it is unlikely you will be able to see anything interesting below from the surface.

On a boat dive, a snorkel is totally useless - leave it home. Chances are, the captain and crew will tell you to take it off anyway. The same is generally true for inlet diving where the entry is steep. A snorkel is just one extra thing to get tangled up, and you will probably have enough of that already. A snorkel might be useful in a surface swim from the beach out to a close-in dive site, if it is a good one with purge valve or a dry valve to keep the water out entirely. Even then, you are better off doing a backstroke out to the site, with your head out of the water so you can navigate by landmarks, or an underwater swim if the currents are favorable.


2016 Update

Computers and electronics change so fast it is hard to keep up with it. The general recommendations below should hold up pretty well even as the technology races forward.


The dive computer should be considered standard equipment. Diving with a computer will give you more bottom time and more safety margin than crude estimating with dive tables. If you are buying your first set of gear, get a computer rather than analog gauges, and you will not regret it. There is a great deal of variation in the design and operation of dive computers. Among the choices you can make are:

dive computers
  • air-integrated or not
  • conservative vs. liberal algorithms
  • violation lock-out mode
  • Nitrox-ready or not
  • wrist, console or hose mounted
  • dive logging & PC interface
  • backlighting for night diving
  • auto-on vs. manual-on

drysuit

Serious New Jersey divers wear drysuits. A drysuit is a waterproof suit with built-in feet that seals around your neck and wrists ( some have built-in water-tight gloves and/or hoods as well, ) and a waterproof zipper to close it up. The idea is that although you are underwater, you don't get wet, but this is not entirely true. No seal is perfect, and certain actions will let small amounts of water leak in past the seals. However, most of the moisture that accumulates in a drysuit comes from its occupant, in the form of perspiration. If water can't get in, then it can't get out either. Perhaps these should be called dampsuits instead of drysuits.

Still, in cold water, a drysuit is much warmer than a wetsuit. This is because you maintain a constant layer of air between you and the cold, and air is an excellent insulator. While air is also the insulating factor in wetsuits, there is a difference. With either suit, the volume of air, and therefore the amount of insulation, compresses as you go deeper. With a wetsuit, there is nothing you can do about this, but with a drysuit, simply tap the inlet valve, and compressed air will flow from your tank into the suit, and puff it up again, keeping you warm. An added benefit is that by keeping the suit inflated to a constant volume, you maintain constant buoyancy, from the surface to the bottom, which can actually reduce the amount of lead you need to carry. Some divers even dispense with the BCD, considering that a drysuit can be thought of as a full-body BCD, but this is not recommended, and it is convenient to use the BCD as a quick trimming device and for surface flotation.

Printed from njscuba.net